DJI Goggles

Grid View:
Quickview

DJI Goggles Carry More Backpack

(0)
119.00€

Space for lots of equipment...

Quickview

DJI Goggles Corrective Lenses (+2.0D)

(0)
29.00€

The DJI Goggles Corrective Lenses can be directly mounted onto the lens frames of DJI Goggles (both regular and racing editions), helping to correct hyperopia to see content more clearly. The recommended diopter is +1.0D higher than your prescription. For example, for a +2.0D diopter, +3.0D Goggles corrective lenses should be selected...

Quickview

DJI Goggles HDMI (Type A) Female to HDMI (Type C) Male Adaptor

(0)
6.00€

Used together with DJI Goggles' HDMI cable to transmit video feedback from the Inspire 1 remote controller to the DJI Goggles...

Quickview

DJI Goggles Racing Edition

(0)
599.00€

Inheriting all the functions and dual 1080p HD screens from the original DJI Goggles, DJI Goggles RE support Sphere pano viewing and local video playback, offering an upgraded FPV experience...

Quickview

DJI Goggles Racing Edition Mono 3.5mm Jack Plug Cables (Mono 3.5mm Jack Plug)

(0)
7.00€

Connects the coach interface of a third-party remote controller and the auto interface of DJI Goggles RE.The Mono 3.5mm Jack Plug Cable connects the coach interface of a third-party remote controller and the auto interface of DJI Goggles RE to transmit control signal from the remote controller to the aircraft...

Quickview

DJI Goggles Racing Edition OcuSync Air Unit

(0)
119.00€

High-resolution and low-latency digital video transmission device...

Quickview

DJI Goggles Racing Edition OcuSync Cables (MMCX to MMCX)

(0)
9.00€

MMCX to MMCX/MMCX to SMA:Soft and adaptive to different airframes. 3-in-1 (Power, S-Bus, UART):The 3-in-1 Cable (power, S-Bus, and UART) connects the power source and flight controller to the S-Bus interface on the OcuSync Air Unit. PPM:The OcuSync PPM Cable connects the OcuSync Air Unit and gimbal servo, so that Head Tracking functions can..

Quickview

DJI Goggles Racing Edition OcuSync Camera

(0)
59.00€

Equipped with a 1.2 MP Global Shutter and a CMOS sensor, the camera effectively eliminates the jello effect...

Quickview

DJI Goggles Racing Edition OcuSync External Fan

(0)
35.00€

DJI OcuSync External Fan can be mounted onto the DJI OcuSync Air Unit to dissipate heat. It is recommended to use the external fan when the air unit is operated still or in a high temperature environment...

Quickview

DJI Goggles Racing Edition OcuSync Pagoda Antenna (SMA interface)

(0)
10.00€

Pagoda Antenna (MMCX Interface)/Pagoda Antenna (SMA Interface):The OcuSync Pagoda Antenna is a small 5.8 GHz single-frequency LHCP omnidirectional antenna designed for drone racing, which can be mounted on the Air Unit via the MMCX interface. Do not use this antenna for 2.4 GHz transmission. Cylindrical Antenna:The OcuSync Cylindrical An..

Quickview

DJI Goggles Racing Edition Reversed SMA connector

(0)
7.00€

Used with the Pagoda Antenna to receive analog transmission from a third-party transmitter...

Quickview

DJI Goggles Sleeve

(0)
25.00€

Used to Transport or store the DJI Goggles...

Quickview

DJI Goggles/Mavic Sling Bag

(0)
89.00€

Holds DJI Goggles, Mavic Pro or Spark, and accessories...

Quickview

DJI OcuSync Air System

(0)
169.00€

The DJI OcuSync Air System is an integrated high-resolution video transmission solution consisting of a camera, Air Unit module, three antennas, and other connectors...

Quickview

Micro USB OTG Cable

(0)
6.00€

The OTG cable connects to a Mavic Mini or Spark remote controller via a Micro USB port at one end and connects to an external device via a USB port (USB Type-A port) at the other end to transmit video feedback and control data...

Showing 1 to 15 of 26 (2 Pages)